Model 75AT/85AT Operation Quick Guide
Quick operational summary
Marc Steele
Last Update 10 maanden geleden
Mounting/Air Connection:
The single-blow air hammer requires a compressed air connection. There are two air-port locations on the handheld version: one at the base of the handle (B), and one on the back of the unit (A - opposite the stamp holder). Connect an airline to either one of these locations. Keep the other location plugged.
Model 75AT/85AT is air powered to generate the marking force. CMT recommends a 3/8” minimum shop airline, and each unit should be installed with its own FRL (Filter Regulator Lubricator). Maximum operating air pressure is 80 psi, minimum operating air pressure is 20 psi.
Item 75FRL15 includes:
• Filter to keep compressed air clean.
• Regulator to control air pressure to the single blow air hammer – and the resulting marking depth.
• Lockout – for safety shut off air during tooling changeover and maintenance.
- Hose – Blue flexible hose to allow for flexible easy hand help operation, 15 ft [4.5 m].
